|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
FSA1156, FSA1157 -- Low RON Low-Voltage SPST Analog Switch January 2008 FSA1156, FSA1157 Low-RON Low-Voltage SPST Analog Switch Features Maximum 0.9 RON for 4.5V Supply at 25C 0.3 Maximum RON Flatness for 4.5V Supply Broad VCC Operating Range: 1.65V to 5.5V Fast Turn-on and Turn-off Time Over-voltage Tolerant, TTL-compatible Control Input Available in SC70 and MicroPakTM Space-saving, General Description The FSA1156 and FSA1157 are high-performance Single-Pole / Single-Throw (SPST) analog switches. The devices feature ultra-low RON of 0.75 (typical) and operate over a wide VCC range of 1.65V to 5.5V. The devices are fabricated with sub-micron CMOS technology to achieve fast switching speeds. The select input is TTL-level compatible. The FSA1156 has normally open operation; the FSA1157 has normally closed operation. Surface-mount Packages Ordering Information Order Number FSA1156P6 FSA1156P6X FSA1156L6X FSA1157P6 FSA1157P6X FSA1157L6X Package Top Mark Number MAA06A MAA06A MAC06A MAA06A MAA06A MAC06A 156 156 EH 157 157 EJ Package Description 6-Lead SC70, EIAJ SC88, 1.25mm Wide 6-Lead SC70, EIAJ SC88, 1.25mm Wide 6-Lead MicroPak, 1.0mm Wide 6-Lead SC70, EIAJ SC88, 1.25mm Wide 6-Lead SC70, EIAJ SC88, 1.25mm Wide 6-Lead MicroPak, 1.0mm Wide Packing Method 250 Units Tape and Reel 3000 Units Tape and Reel 5000 Units Tape and Reel 250 Units Tape and Reel 3000 UnitsTape and Reel 5000 UnitsTape and Reel All packages are lead free per JEDEC: J-STD-020B standard. MicroPakTM is a trademark of Fairchild Semiconductor Corporation. (c) 2003 Fairchild Semiconductor Corporation FSA1156, FSA1157 * Rev. 1.0.3 www.fairchildsemi.com FSA1156, FSA1157 -- Low RON Low-Voltage SPST Analog Switch Analog Symbols Pin Assignment for SC70 Package Pin Assignment for MicroPakTM A 1 6 VCC VCC 1 6 A GND 2 5 NC NC 2 5 B B 3 4 S S 3 4 GND (Top View) FSA1156 (Normally Open) (Top Through View) FSA1156 (Normally Open) A 1 6 VCC VCC 1 6 A GND 2 5 NC NC 2 5 B B 3 4 S S 3 4 GND (Top View) FSA1157 (Normally Closed) (Top Through View) FSA1157 (Normally Closed) Figure 1. Pin Configurations Truth Table Control Input(s) LOW Logic Level HIGH Logic Level Pin Descriptions FSA1156 OFF ON FSA1157 ON OFF Pin Names A, B S NC Function Data Ports Control Input No Connect (c) 2003 Fairchild Semiconductor Corporation FSA1156, FSA1157 * Rev. 1.0.3 www.fairchildsemi.com 2 FSA1156, FSA1157 -- Low RON Low-Voltage SPST Analog Switch Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC VSW VIN IIK ISW ISWPEAK PD TSTG TJ TL ESD Note: Supply Voltage Switch Voltage Input Voltage (1.) (1.) Parameter Min. -0.5 -0.5 -0.5 Max. +6.0 VCC +0.5V +6.0 -50 200 400 180 Unit V V V mA mA mA mW C C C V Input Diode Current Switch Current Peak Switch Current (Pulsed at 1ms Duration, <10% Duty Cycle) Power Dissipation at 85C, SC70 Package Storage Temperature Range Maximum Junction Temperature Lead Temperature (Soldering, 10 seconds) Human Body Model -65 +150 +150 +260 8000 1. The input and output negative ratings may be exceeded if the input and output diode current ratings are observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC VIN VSW TA JA Note: Supply Voltage Control Input Voltage(2.) Switch Input Voltage Operating Temperature Parameter Min. 1.65 0 0 -40 350 Max. 5.50 VCC VCC +85 Unit V V V C C/W Thermal Resistance in Still Air, SC70 package 2. Control input must be held HIGH or LOW. It must not float. (c) 2003 Fairchild Semiconductor Corporation FSA1156, FSA1157 * Rev. 1.0.3 www.fairchildsemi.com 3 FSA1156, FSA1157 -- Low RON Low-Voltage SPST Analog Switch DC Electrical Characteristics All typical values are at 25C unless otherwise specified. Symbol Parameter Conditions VCC (V) 2.7 to 3.6 4.5 to 5.5 2.7 to 3.6 4.5 to 5.5 2.7 to 3.6 4.5 to 5.5 5.5 5.5 2.7 4.5 2.7 4.5 3.6 5.5 TA= +25C Min. TA= -40C to +85C 2.0 2.4 0.6 0.8 -1.0 -1.0 1.0 1.0 20.0 40.0 2.5 1.00 Unit Typ. Max. Min. Max. V V A nA nA VIH VIL IIN Input Voltage High Input Voltage Low Control Input Leakage VIN = 0V to VCC INO(OFF), A = 1V, 4.5V; Off Leakage Current INC(OFF) B = 4.5V, 1V IA(ON) RON On Leakage Current Switch On Resistance(3.) A = 1V, 4.5V; B = 1V, 4.5V or Floating IOUT = 100mA, B = 1.5V IOUT = 100mA, B = 3.5V IOUT = 100mA; B0 = 0V, 0.75V, 1.5V IOUT = 100mA; B0 = 0V, 1V, 2V VIN = 0V or VCC, IOUT = 0V -2.0 -4.0 1.4 0.75 0.6 2.0 4.0 2.1 0.90 20.0 -40.0 On Resistance RFLAT(ON) Flatness(4.) Quiescent Supply Current 0.1 0.1 0.1 0.2 0.5 0.5 0.3 1.0 1.0 A ICC Notes: 3. On resistance is determined by the voltage drop between the A and B pins at the indicated current through the switch. 4. Flatness is defined as the difference between the maximum and minimum value of on resistance over the specified range of conditions. (c) 2003 Fairchild Semiconductor Corporation FSA1156, FSA1157 * Rev. 1.0.3 www.fairchildsemi.com 4 FSA1156, FSA1157 -- Low RON Low-Voltage SPST Analog Switch AC Electrical Characteristics All typical values are at 25C unless otherwise specified. Symbol Parameter Conditions B = 1.5V, RL = 50, CL = 35pF B = 3.0V, RL = 50, CL = 35pF B = 1.5V, RL = 50, CL = 35pF B = 3.0V, RL = 50, CL = 35pF CL = 1.0nF, VGE = 0V, RGEN = 0 f = 1MHz, RL = 50 RL = 50 RL = 600, VIN = 0.5VPP, f = 20Hz to 20kHz VCC (V) 2.7 to 3.6 4.5 to 5.5 2.7 to 3.6 4.5 to 5.5 2.7 to 3.6 4.5 to 5.5 2.7 to 3.6 4.5 to 5.5 2.7 to 3.6 4.5 to 5.5 2.7 to 3.6 4.5 to 5.5 TA =+25C Min. TA = -40C to +85C Unit Typ. Max. Min. Max. 30 15 25 22 10 20 -65 -65 300 300 0.001 0.001 % pC 40 20 35 30 45 ns 25 45 ns 40 Figure Number tON Turn-On Time Figure 4 tOFF Turn-Off Time Figure 4 Q Charge Injection Off Isolation -3db Bandwidth Total Harmonic Distortion Figure 5 OIRR BW dB MHz Figure 6 Figure 7 THD Figure 8 Capacitance Symbol CIN COFF CON Parameter Control Pin Input Capacitance A/B Port Off Capacitance A/B Port On Capacitance Conditions VCC (V) f = 1MHz f = 1MHz f = 1MHz 0.0 4.5 4.5 TA = +25C Min. Typ. 3 20 65 Max. Units pF pF pF Figure Number Figure 9 Figure 9 Figure 9 (c) 2003 Fairchild Semiconductor Corporation FSA1156, FSA1157 * Rev. 1.0.3 www.fairchildsemi.com 5 FSA1156, FSA1157 -- Low RON Low-Voltage SPST Analog Switch Typical Characteristics 1.6 1.4 1.2 VCC = 3.6V VCC = 2.7V VCC = 4.5V RON () 1.0 0.0 0.6 0.4 0.2 0 0 1 2 VIN (V) 3 VCC = 5.0V 4 5 Figure 2. On Resistance vs. Input Voltage, Over Supply Voltage, TA=25 1.2 VCC = 4.5V 1.0 0.8 RON () TA = 25C TA = 85C 0.6 TA = 40C 0.4 0.2 0 0 1 2 VIN (V) 3 4 Figure 3. On Resistance vs. Input Voltage, Over Temperature (c) 2003 Fairchild Semiconductor Corporation FSA1156, FSA1157 * Rev. 1.0.3 www.fairchildsemi.com 6 FSA1156, FSA1157 -- Low RON Low-Voltage SPST Analog Switch AC Loading and Waveforms VCC VCC VB B A RL 50 VOUT CL 35 Switch Output VOUT o ION CL Includes Fixture and Stray Capacitance Logic Input Waveforms Inverted for Switches that have the Opposite Logic Sense 0.9 x VOUT Control Input VCC VINL tr = tf = 2ns 10%-90% 50% S GND tOFF 0.9 x VOUT Figure 4. Turn-On / Off Timing VCC RGEN + VGE GND S Control Input IN OFF ON Q = (VOUT)(CL) OFF VCC B A CL VOUT VOUT IN VOUT OFF ON OFF Figure 5. Charge Injection VCC 10nF Network Analyzer 0 or VCC S VCC A VIN 50 50 ON-LOSS = 20log OFF-ISOLATION = 20log VOUT VIN VOUT VIN 0dBm B GND VOUT MEAS 50 REF 50 Figure 6. Off Isolation (c) 2003 Fairchild Semiconductor Corporation FSA1156, FSA1157 * Rev. 1.0.3 www.fairchildsemi.com 7 FSA1156, FSA1157 -- Low RON Low-Voltage SPST Analog Switch AC Loading and Waveforms (Continued) 10nF Signal Generator 0dBm B VCC A 50 Analyzer Logic Input 0V or VCC S GND Figure 7. Bandwidth 10nF VIN Signal Generator BN VCC A RL Analyzer S Logic Input 0V or VCC GND Figure 8. Harmonic Distortion 10nF VCC A S Capacitance Meter f = 1MHz B GND 0V or VCC Figure 9. On / Off Capacitance (c) 2003 Fairchild Semiconductor Corporation FSA1156, FSA1157 * Rev. 1.0.3 www.fairchildsemi.com 8 FSA1156, FSA1157 -- Low RON Low-Voltage SPST Analog Switch Physical Dimensions Figure 10. 6-Lead SC70, EIAJ SC88, 1.25mm Wide Note: click here for tape and reel specifcations, available at: http://www.fairchildsemi.com/products/analog/pdf/sc70-6_tr.pdf Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c) 2003 Fairchild Semiconductor Corporation FSA1156, FSA1157 * Rev. 1.0.3 www.fairchildsemi.com 9 FSA1156, FSA1157 -- Low RON Low-Voltage SPST Analog Switch Physical Dimensions (Continued) 2X 0.05 C 1.45 B 2X 0.05 C (1) 1.00 (0.49) 5X (0.75) (0.52) 1X (0.30) 6X RECOMMENED LAND PATTERN 0.05 C 0.45 0.35 TOP VIEW 0.55MAX A PIN 1 0.05 C 0.05 0.00 C 0.25 0.15 6X 0.10 0.05 0.35 5X 0.25 0.40 5X 0.30 (0.05) 6X 0.5 BOTTOM VIEW (0.13) 4X CBA C 0.10 0.00 6X DETAIL A 1.0 0.40 0.30 0.075 X 45 CHAMFER DETAIL A PIN 1 TERMINAL Notes: 1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD 2. DIMENSIONS ARE IN MILLIMETERS 3. DRAWING CONFORMS TO ASME Y14.5M-1994 MAC06AREVC Figure 11. 6-Lead MicroPak, 1.0mm Wide Note: click here for tape and reel specifcations, available at: http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ (c) 2003 Fairchild Semiconductor Corporation FSA1156, FSA1157 * Rev. 1.0.3 www.fairchildsemi.com 10 FSA1156, FSA1157 -- Low RON Low-Voltage SPST Analog Switch (c) 2003 Fairchild Semiconductor Corporation FSA1156, FSA1157 * Rev. 1.0.3 www.fairchildsemi.com 11 |
Price & Availability of FSA115608 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |